M12 Receptacle Connectors

 
Recently visited products

Lumberg AutomationTM flush-type connectors: For the construction of equipment, sensors and actuators, various receptacle connectors and connector inserts are available. Receptacle connectors to be used as panel feed-throughs are rated IP 67 when mated to the associated matching component. They are installed either from the front or from the rear in the device panel.

Results per Page: 10
Page 1 of 21|2

Product

M12 Receptacle connector, rear mounting, print contacts - RSHL 4/S 5,5

RSHL 4/S 5,5

Receptacle connector, for rear mounting, M12 male connector, print contacts, chassis side thread PG 9 (panel nut RSKF 9), 4 poles, A coding


To Product
 

Product

M12 Receptacle connector, front mounting, solder connections - RSFM 3

RSFM 3

Receptacle connector, for front mounting, male connector, solder connections, chassis side thread M16 x 1.5 (panel nut RSKFM 16), 3 poles, A coding.


To Product
 

Product

M12 Receptacle connector, for sensors - RSE 4

RSE 4

Receptacle connector, M12 male connector for sensors, press-in tube mounting, with short solder contacts, without antirotation protection, 4 poles, A coding, without ventilation hole.


To Product
 

Product Variant

M12 Receptacle connector, for sensors - RSE 4 L

Receptacle connector, M12 male connector for sensors, press-in tube mounting, with short solder contacts, without antirotation protection, 4 poles, A coding, with ventilation hole Ø 2.0 mm .


To Product Variant
 

Product

M12 Receptacle connector, front mounting, with stranded wire - RSFM 3/0,5 M

RSFM 3/0,5 M

Receptacle connector, for front mounting, M12 male connector, assembled stranded wire, solder contacts potted with epoxy, 3 poles, A coding, chassis side thread M16 x 1.5 (panel nut RSKFM 16).


To Product
 
Receptacle connector, for rear mounting, M12 male connector, print contacts, chassis side thread PG 9 (panel nut RSKF 9), 4 poles, A coding..
 
Receptacle connector, for front mounting, male connector, solder connections, chassis side thread M16 x 1.5 (panel nut RSKFM 16), 3 poles, A coding...
 
Receptacle connector, M12 male connector for sensors, press-in tube mounting, with short solder contacts, without antirotation protection, 4 poles, A coding, without ventilation hole...
 
Receptacle connector, M12 male connector for sensors, press-in tube mounting, with short solder contacts, without antirotation protection, 4 poles, A coding, with ventilation hole Ø 2.0 mm ...
 
Receptacle connector, for front mounting, M12 male connector, assembled stranded wire, solder contacts potted with epoxy, 3 poles, A coding, chassis side thread M16 x 1.5 (panel nut RSKFM 16)...
 

Product

M12 Receptacle connector, front mounting with stranded wire, bus connectors - 0976 PMC 151

0976 PMC 151

Receptacle connector, for front mounting, assembled stranded wire (0.5 m), solder contacts potted with epoxy, with adjustable nut, 5 poles, B coding:especially suitable for Profibus, M12 male connector, chassis side thread M16 x 1.5


To Product
 

Product

M12 Receptacle connector, panel feed through - FWD 5

FWD 5

Receptacle connector, M12 male connector to M12 female connector – especially designed for use as panel feed through –, 5 poles, A coding


To Product
 

Product

M12 Receptacle connector, panel feed through - FWD 5B

FWD 5B

Receptacle connector, M12 male connector to M12 female connector – especially designed for use as panel feed through –, 5 poles, B coding (suitable for PROFIBUS)


To Product
 

Product

M12 Receptacle connector, front mounting, print contact, for PROFIBUS - 0976 PMC 152

0976 PMC 152

Receptacle connector, for front mounting, M12 connector, 5 poles, B coding, printed contacts, chassis side thread PG 9 – especially suitable for Profibus


To Product
 

Product

M12 Receptacle connector, front mounting, print contact, for PROFIBUS - 0976 PFC 152

0976 PFC 152

Receptacle connector, for front mounting, M12 female connector, 5 poles, B coding, printed contacts, chassis side thread PG 9 – especially suitable for Profibus


To Product
 
Receptacle connector, for front mounting, assembled stranded wire (0.5 m), solder contacts potted with epoxy, with adjustable nut, 5 poles, B coding:especially suitable for Profibus, M12 male connector, chassis side thread M16 x 1.5..
 
Receptacle connector, M12 male connector to M12 female connector – especially designed for use as panel feed through –, 5 poles, A coding..
 
Receptacle connector, M12 male connector to M12 female connector – especially designed for use as panel feed through –, 5 poles, B coding (suitable for PROFIBUS)..
 
Receptacle connector, for front mounting, M12 connector, 5 poles, B coding, printed contacts, chassis side thread PG 9 – especially suitable for Profibus..
 
Receptacle connector, for front mounting, M12 female connector, 5 poles, B coding, printed contacts, chassis side thread PG 9 – especially suitable for Profibus..
 
Page 1 of 21|2