M12 Circular connector acc. to IEC 61076-2-101

Family
 
Recently visited products

M12 circular connectors have established themselves as a standard in the area of field cabling. Lumberg AutomationTM offers a continuous range of M12 connectors and cordsets for the wiring of your machines and plants.

Results per Page: 10
Page 1 of 1

Product Family

M12 Field Attachable Connectors

Wire up M12 field attachable connectors yourself, easily and flexibly. For each application, Lumberg AutomationTM offers a wide range of sensor/actuator plug connectors for free assembly with screw terminals, solder pins or spring-loaded terminals in straight and angled versions. All IP 67 field attachable connectors offer particularly good protection from dirt and moisture.


To Product Family
 

Product Family

M12 Single Ended Cordsets

Open end: Single ended cordsets (one M12 connector fitted on one end and bare wires on the other end) for the connection of actuators, sensors and distribution boxes. The robust Lumberg AutomationTM connecting cables in protection class IP 67 offer especially good protection from moisture and dirt.


To Product Family
 
M12 Field Attachable Connectors
Wire up M12 field attachable connectors yourself, easily and flexibly. For each application, Lumberg AutomationTM offers a wide range of sensor/actuator plug connectors for free assembly with screw terminals, solder pins or spring-loaded terminals in straight and angled versions. All IP 67 field attachable connectors offer particularly good protection from dirt and moisture...
 
M12 Single Ended Cordsets
Open end: Single ended cordsets (one M12 connector fitted on one end and bare wires on the other end) for the connection of actuators, sensors and distribution boxes. The robust Lumberg AutomationTM connecting cables in protection class IP 67 offer especially good protection from moisture and dirt. ..
 

Product Family

M12 Receptacle Connectors

Lumberg AutomationTM flush-type connectors: For the construction of equipment, sensors and actuators, various receptacle connectors and connector inserts are available. Receptacle connectors to be used as panel feed-throughs are rated IP 67 when mated to the associated matching component. They are installed either from the front or from the rear in the device panel.


To Product Family
 
M12 Receptacle Connectors
Lumberg AutomationTM flush-type connectors: For the construction of equipment, sensors and actuators, various receptacle connectors and connector inserts are available. Receptacle connectors to be used as panel feed-throughs are rated IP 67 when mated to the associated matching component. They are installed either from the front or from the rear in the device panel. ..
 
Page 1 of 1

Product

M12 Receptacle connector, front mounting, print contact, for PROFIBUS - 0976 PFC 152

Receptacle connector, for front mounting, M12 female connector, 5 poles, B coding, printed contacts, chassis side thread PG 9 – especially suitable for Profibus


To Product
 
Receptacle connector, for front mounting, M12 female connector, 5 poles, B coding, printed contacts, chassis side thread PG 9 – especially suitable for Profibus

Product

M12 Receptacle connector, front mounting with stranded wire, bus connectors

RSG-05-CB

Receptacle connector, for front mounting, assembled stranded wire (0.5 m), solder contacts potted with epoxy, with adjustable nut, 5 poles, B coding:especially suitable for Profibus, M12 male connector, chassis side thread M16 x 1.5


To Product
 
Receptacle connector, for front mounting, assembled stranded wire (0.5 m), solder contacts potted with epoxy, with adjustable nut, 5 poles, B coding:especially suitable for Profibus, M12 male connector, chassis side thread M16 x 1.5

Product

M12 Receptacle connector, for sensors

RSG-04-k-v-x-z

Receptacle connector, M12 male connector for sensors, press-in tube mounting, with short solder contacts, without antirotation protection, 4 poles, A coding, without ventilation hole.


To Product
 
Receptacle connector, M12 male connector for sensors, press-in tube mounting, with short solder contacts, without antirotation protection, 4 poles, A coding, without ventilation hole.

Product

M12 Receptacle connector, front mounting, with stranded wire

RSG-03-xM-16

Receptacle connector, for front mounting, M12 male connector, assembled stranded wire, solder contacts potted with epoxy, 3 poles, A coding, chassis side thread M16 x 1.5 (panel nut RSKFM 16).


To Product
 
Receptacle connector, for front mounting, M12 male connector, assembled stranded wire, solder contacts potted with epoxy, 3 poles, A coding, chassis side thread M16 x 1.5 (panel nut RSKFM 16).

Product

M12 Receptacle connector, front mounting, solder connections

RSG-03-HY

Receptacle connector, for front mounting, male connector, solder connections, chassis side thread M16 x 1.5 (panel nut RSKFM 16), 3 poles, A coding.


To Product
 
Receptacle connector, for front mounting, male connector, solder connections, chassis side thread M16 x 1.5 (panel nut RSKFM 16), 3 poles, A coding.

Product

M12 Single Ended Cordsets - Shieldable Types

RKGTS_04-182-02

Actuator/sensor cordset, single-ended, M12 female connector, straight version, with threaded joint and molded cable, shielding connected to knurled screw, 4 poles, PVC jacket, 2 meters


To Product
 
Actuator/sensor cordset, single-ended, M12 female connector, straight version, with threaded joint and molded cable, shielding connected to knurled screw, 4 poles, PVC jacket, 2 meters

Product

M12 Single Ended Cordsets - Standard Types with LED

RKGT-04-LED_A-006-02

Actuator/sensor cordset, M12 female connector, straight version, with self-locking threaded joint and molded cable, with LED operation and function indicator, 4 poles, A circuit, PVC jacket, 2 meters


To Product
 
Actuator/sensor cordset, M12 female connector, straight version, with self-locking threaded joint and molded cable, with LED operation and function indicator, 4 poles, A circuit, PVC jacket, 2 meters